Klargester Car Wash Silt Trap

The Klargester Car Wash Silt Trap is installed in areas with particularly high silt run-off, including vehicle or cash wash forecourts.

A silt trap is designed to provide simple, effective separation and storage of silt to protect drainage systems. This is situated before a separator in car wash applications to ensure effective silt removal.
Features and Benefits

  • FACTA Class B Galvanised Covers
  • Light an easy to install
  • Maintenance from ground level
  • Capacity 1,150 litres



Comments

Post a Comment

Popular posts from this blog

Soakaway Sizing

Image
https://www.wastewater-supplies.com/ Percolation test method Excavate a hole 300mm square to a depth 300mm below the proposed invert level of the soakaway pipes. Fill the 300mm square hole to at least the 300mm mark and allow to soakaway over night. On the next day, fill to the 300mm mark again and observe the time it takes to soakaway in seconds, from 70% full to 25% full. Divide the time taken by 150.  The answer gives you the average time in seconds (V). Carry out this test at least 3 times in at least 2 different places. Drain fields or soakaways should only be installed when the results are between 12 -100. If the value is outside these parameters you might need to install a sewage treatment plant. If you are unsure or need any further assistance please call us on 01923 260846 and we will be happy to help. Design And Construction Of The Soakaway The minimum size a soakaway should be constructed to is 30m. Soakaway
Read more

Clenviro - Matrix CLF1

Image
https://www.wastewater-supplies.com/products/clenviro-matrix-clf1 The Clenviro Matrix CLF1 will serve up to 6 people or 4 bedrooms Matrix sewage treatment systems are designed to optimise process efficiency, minimise running and maintenance costs and to be as simple and cost effective as possible to install. The MATRIX sewage treatment system is designed to achieve the minimum required effluent quality standard of 20mg/litre (BOD) : 30mg/litre (SS) : 20mg/litre Ammoniacal  The certified performance of the MATRIX system is that it produces an average final effluent quality of 11mg/litre (BOD) : 16mg/litre (SS) and 7mg/litre Ammoniacal. This relates to an average efficiency ratio of 96.2%, better than most other manufacturers. As part of the test procedure the MATRIX system was proven to have one of the lowest operating costs. All Matrix sewage treatment plants have a standard inlet invert depth, but in keeping with our commitment to customer satisfaction a
Read more